Candy MODELS FOR UNDER-COUNTER FITTING Manual do Utilizador descarregar pdf (Página 13)

Installation and Operation. . .

Double Check 1/ If

0 Securely fastened in place.

0 Water supply valve turned on.

0 Checked out for leaks at joints.

0 Wire connections tight, water inlet valve wiring in place.

0 Make certain electricity is turned on.

0 No kinks in water line.

0 Recheck the removal of packing material and Customer Literature

Package from interior of dishwasher.

-17,

/y-u’

0 Spin spray arms to check movement.

7/-

0 Start dishwasher.

0 Check water level . , .

water should fill to the round heater element.

0 Check for complete drain .

no water should be visible above

grate when drain is complete.

0 Check for leaks . .

particularly around door, pum.p mounting

gasket, and at hose connections. Also the plumbing connection

at the water inlet valve.

NOTE TO INSTALLER: Put Installation Instruction back in Literature Package and place

inside dishwasher so that all information will be readily available to the user.

Adjust Door Springs and Install Access Panel

(Less tension)

Dishwasher leg

After dishwasher has been secured in the cabinet opening, check door

for proper operation. If adjustment is necessary, close door and adjust

door springs with pliers so door closes easily without slamming and

stays open with its own weight. See Figure 12. Install the access panel

by using the 4 screws that were removed (2 screws on each end). (See

Figure 13)

1 2 ... 8 9 10 11 12 13 14 15 16

Sem comentários

Candy MODELS FOR UNDER-COUNTER FITTING Manual do Utilizador Página 13